Operating Procedures for Fully Automatic Can Sealing Machine - Quanzhou Can Sealing Machine

Operating Procedures for Fully Automatic Can Sealing Machine - Quanzhou Can Sealing Machine

The sealing main motor, when the sealing clutch disc is hung on top of the clutch cylinder, automatically disengages after 11 cycles of operation. Due to the tension of the spring, the hanging pin is pulled out of the concave hole to complete a sealing action--- Quanzhou can sealing machine

When the frequency conversion is enabled, the indexing motor starts to operate, and the operating clutch electromagnetic suction cup is energized to match the reducer with the motor, driving the divider to perform indexing action.

After the product is indexed in place by the indexing turntable, before performing the sealing action, the can pressing cylinder presses the product into the wheel thread to perform the sealing action. The top material cylinder is used to top the sealed product to prevent it from getting stuck on the sealing tray when it is not pushed into the indexing plate product during operation again, making the indexing plate unable to operate.

When the product indexing is in place and a sealing action is required, the sealing cylinder lifts the gear plate through a bracket. After about 0.5 seconds of hanging the pin and the concave hole, the clutch cylinder stops and resets. At this point, the gear cannot come off due to the rotation of the main motor, and it needs to wait for 11 cycles before it automatically comes off. The spring pulls the Liulihe plate away from the concave hole. After 0.5 seconds of lifting the sealing cylinder, the release plate should be able to automatically hang under normal circumstances. If not, check the mechanical device--- Quanzhou can sealing machine